|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
|
｜Photo
｜Dimensions
｜Mounting Hole Dimensions
｜Terminal Layout / Circuit Diagram
｜ ｜Packing Specifications ｜ |
|
9mm Size Insulated Shaft Snap-in Type RK09K/RK09D Series
Detail
| Part number | RK09D113000F |
| Number of resistor elements |
Single-unit (20V DC) |
| Mounting direction (Mounting height) | Vertical type |
| Collar (Sleeve type) | With |
| Shaft types | Flat |
| Length of the shaft LM1 | 30mm |
| Center detent | With |
| Total resistance | 10kΩ |
| Resistance taper | 1B |
| Minimum order unit (pcs.) | 2,000 |
| Operating temperature range | -10℃ to +70℃ | |
| Electrical Performance | Total resistance tolerance | ±20% |
| Maximum operating voltage | 50V AC, 20V DC | |
| Insulation resistance | 100MΩ min. 250V DC | |
| Voltage proof | 250V AC for 1 minute | |
| Mechanical Performance | Total rotational angle | 300±5° |
| Rotational torque | 1 to 8mN·m | |
| Stopper strength | 0.3N·m | |
| Push-pull strength | 50N max. | |
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively | |
| Solder heat resistance | Manual soldering | 350℃ max. 3s max. |
| Durability | Operating life | 5,000 cycles |
| Environmental test | Cold | -30±2℃ for 96h |
| Dry heat | 70±2℃ for 96h | |
| Damp heat | 40±2℃, 90 to 95%RH for 96h | |
| 3D CAD (STEP) | |
| Certificate of Compliance to RoHS regulations |
Photo
Dimensions
Mounting Hole Dimensions
|
Terminal Layout / Circuit Diagram
Packing Specifications
| Bulk |
| Number of packages (pcs.) | 1 case / Japan | 1,000 |
| 1 case / export packing | 2,000 | |
| Export package measurements (mm) | 368×530×180 | |
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsukamachi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
