ALPS Manufacturer of Electronic Components/Parts Catalog

One-way Operation Type SPPW8 Series

Detail

Part number

SPPW810201

Poles	1
Positions	1
Terminal type	For PC board (Reflow)
Operating force	0.3N max.
Slider height (mm)	h=6.55
ON start position (mm)	h1=6.05
Total travel (mm)	h2=4.85
Minimum order unit (pcs.)	4,000

Operating temperature range		-10℃ to +60℃
Rating (max.)/(min.) (Resistive load)		0.1A 30V DC/100μA 3V DC
Electrical performance	Contact resistance (Initial performance/After lifetime)	1Ω max./2Ω max.
	Insulation resistance	100MΩ min. 100V DC
	Voltage proof	100V AC for 1 minute
Mechanical performance	Terminal strength	3N for 1 minute
	Actuator strength	10N
	Vibration	10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Resistance to soldering heat	Manual soldering	350±5℃, 3s max.
	Reflow soldering	Refer to soldering conditions
Durability	Operating life without load	100,000 cycles 2Ω max.
	Operating life with load (Load: as ratings)	100,000 cycles 2Ω max. (0.1A 30V DC)
Environmental performance	Cold	-20±2℃ for 96h
	Dry heat	85±2℃ for 96h
	Damp heat	40±2℃, 90 to 95%RH for 96h

3D CAD (STEP)
Certificate of Compliance to RoHS regulations

Dimensions

1. Products without location lug are also available. 2. Contact us for other slider height variations. 3. Contact us for other terminal types.

Land Dimensions

Viewed from direction A in the dimensions.

Terminal Layout

mark shows a cutting terminal.

Circuit Diagram

Packing Specifications

Taping

Number of packages (pcs.)	１ reel	1,000
	1 case / Japan	2,000
	1 case / export packing	4,000
Tape width (mm)		24
Export package measurements (mm)		406×406×160

Soldering Conditions

Example of Reflow Soldering Condition

1. Heating method : Double heating method with infrared heater.

2. Temperature measurement : Thermocouple 0.1 to 0.2 Φ CA (K) or CC (T) at soldering portion (copper foil surface). A heat resisting tape should be used for fixed measurement.

3. Temperature profile

(1) The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures.

(2) Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended.

A(℃) 3s max. B(℃) C(s) D(℃) E(℃) F(s) 250 200 20 180 150 120

Notes are common to this series/models.

This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply. Standard type dimensions indicate "with location lug." version. Please place purchase orders per minimum order unit (integer). Products other than those listed in the above chart are also available. Please contact us for details.

Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsukamachi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154