|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
|
｜Dimensions
｜Mounting Hole Dimensions
｜Actuator Configuration at Front Edge
｜Circuit Diagram
｜ ｜Packing Specifications ｜Attached Parts ｜ |
|
2.5mm-travel Large-sized Horizontal Type SPUN Series
Detail
| Part number | SPUN192600 |
| Changeover timing | Non shorting |
| Travel | 2.5mm |
| Total travel | 3.5mm |
| Rating | Medium-current |
| Operating force | 3±1.5N |
| Mounting method | PC board |
| Poles | 2 |
| Operation | Latching |
| Terminal type | Straight |
| Minimum order unit (pcs.) | 1,250 |
| Operating temperature range | -10℃ to +60℃ | ||
| Rating (max.)/(min.) (Resistive load) | 1A 25V DC (Rating) | ||
| Electrical performance | Contact resistance (Initial performance/After lifetime) | 20mΩ max./40mΩ max. | |
| Insulation resistance | 100MΩ min. 500V DC | ||
| Voltage proof | 500V AC for 1 minute | ||
| Mechanical performance | Terminal strength | 5N for 1 minute | |
| Actuator strength | Operating direction | 50N | |
| Pulling direction | 50N | ||
| Resistance to soldering heat | Manual soldering | 350±10℃, 3(+1, 0)s | |
| Dip soldering | 260±5℃, 10±1s | ||
| Durability | Operating life without load |
10,000 cycles 40mΩ max. |
|
| Operating life with load (Load: as ratings) |
5,000 cycles 40mΩ max. |
||
| Environmental performance | Cold | -20±2℃ for 96h | |
| Dry heat | 85±2℃ for 96h | ||
| Damp heat | 40±2℃, 90 to 95%RH for 96h | ||
| 3D CAD (STEP) | |
| Certificate of Compliance to RoHS regulations |
Dimensions
Mounting Hole Dimensions
|
Actuator Configuration at Front Edge
Circuit Diagram
Packing Specifications
| Bulk |
| Number of packages (pcs.) | 1 case / Japan | 250 |
| 1 case / export packing | 1,250 | |
| Export package measurements (mm) | 400×270×290 | |
Attached Parts
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsukamachi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
