Part number RK09L114001T
Number of resistor elements Single-unit
Mounting direction Vertical type
Fixing method of bushing Screw
Shaft types Flat
Length of the shaft 20mm
Center detent With
Total resistance 10kΩ
Resistance taper 1B
Operating temperature range -10℃ to +70℃
Electrical Performance Total resistance tolerance ±20%
Rated power 0.05W
Maximum operating voltage 50V AC, 10V DC
Residual resistance 20Ω max.
Insulation resistance 100MΩ min. 250V DC
Voltage proof 300V AC for 1 minute
Mechanical Performance Total rotational angle 300°±5°
Rotational torque 2 to 25mN·m
Stopper strength 0.5N·m
Push-pull strength 80N max.
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively
Durability Operating life 15,000 cycles
Minimum order unit (pcs.) Japan 1,000
Export 2,000
 

Photo

Rotary Potentiometer

Dimensions

Rotary Potentiometer

Mounting Hole Dimensions

Rotary Potentiometer
 
Viewed from mounting side.

Dimensions of Bushing and Fixing Lug

Rotary Potentiometer
 
These parts are attached to the following products.

Attached Parts

Rotary Potentiometer

Packing Specifications

Tray
Number of packages (pcs.) 1 case / Japan 1,000
1 case / export packing 2,000
Export package measurements (mm) 364×473×176

Soldering Conditions

Reference for Dip Soldering
PreheatingSoldering surface temperature100℃ max.
Heating time2 min. max.
Dip solderingSoldering temperature260±5℃ max.
Soldering time5±1s
No. of solders2 time max.

Reference for Hand Soldering
Tip temperature350℃ max.
Soldering time3s max.
No. of solders1 time


Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).
  3. Products other than those listed in above products are also available. Please contact us for details.
  4. Please contact us for automotive use products.