Part number RK16814MGA0K
Number of resistor elements Quad-unit
Mounting direction Horizontal type
Fixing method of bushing Screw
Shaft types Flat
Length of the shaft 25mm
Total resistance 100kΩ
Resistance taper 15A
Motor print terminal Without
Motor voltage 4 to 6V DC (standard: 4.5V)
Potentiometer rotational speed 12±3 sec/300° (4.5V DC)
Maximum operating current At rotation: 100mA/At end slip: 150mA
Operating temperature range -10℃ to +70℃
Electrical Performance Total resistance tolerance ±20%
Rated power 0.05W
Maximum operating voltage 50V AC
Maximum attenuation 100dB min.
Gang error -60dB to 40dB 5dB max.
-40dB to 0dB 3dB max.
Insulation resistance 100MΩ min. 250V DC
Voltage proof 300V AC for 1 minute
Mechanical Performance Total rotational angle 300±5°
Rotational torque 10 to 40mN·m
Stopper strength 0.9N·m
Push-pull strength 100N max.
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively
Durability Operating life 15,000 cycles
Minimum order unit (pcs.) Japan 200
Export 200
 

Photo

Rotary Potentiometer

Dimensions

Rotary Potentiometer

Mounting Hole Dimensions

Rotary Potentiometer
 
Viewed from mounting side.

Standard Dimensions of Bushing and Fixing Lug

Rotary Potentiometer

Attached Parts

Rotary Potentiometer
 
These parts are attached to the following products.

Packing Specifications

Tray
Number of packages (pcs.) 1 case / Japan 200
1 case / export packing 200
Export package measurements (mm) 368×527×215

Soldering Conditions

Reference for Hand Soldering
Tip temperature300℃ max.
Soldering time3s max.
No. of solders1 time


Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).
  3. Products other than those listed in above products are also available. Please contact us for details.