Travel 3mm
Actuator directions Vertical
Actuator length 6mm
Poles 2
Positions 3
Operating force Refer to the dimensions.
Mounting method Snap-in (t1.6)
Changeover timing Non shorting
Soldering Manual, Dip
Operating temperature range -40℃ to +85℃
Rating (max.)/(min.) (Resistive load) 0.1A 30V DC/10µA 1V DC
Electrical performance Contact resistance
(Initial performance/After lifetime)
25mΩ max./65mΩ max.
Insulation resistance 100MΩ min. 500V DC
Voltage proof 500V AC for 1 minute
Mechanical performance Terminal strength 5N for 1 minute
Actuator strength Operating direction 30N
Pulling direction 30N
Durability Operating life without load 10,000 cycles 45mΩ max.
Operating life with load
(at max. rated load)
10,000 cycles 65mΩ max.
Environmental performance Cold -40℃ 500h
Dry heat 85℃ 500h
Damp heat 60℃, 90 to 95%RH 500h
Minimum order unit (pcs.) Japan 500
Export 2,500
 

Dimensions

Slide Switch

Mounting Hole Dimensions

Slide Switch
 
Viewed from direction A in the dimensions.

Actuator Configuration

Slide Switch

Shape of Frame Leg

Slide Switch

Circuit Diagram

Slide Switch

Packing Specifications

Bulk
Number of packages (pcs.) 1 case / Japan 500
1 case / export packing 2,500
Export package measurements (mm) 400×270×290

Soldering Conditions

Reference for Dip Soldering
ItemsPreheating temperature100℃ max.
Preheating time60s max.
Dip solderingSoldering temperature260±5℃
Duration of immersion5±1s

Reference for Hand Soldering
Soldering temperature350±10℃
Soldering time3+1/0s


Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).
  3. Products other than those listed in the above chart are also available. Please contact us for details.