ALPS Manufacturer of Electronic Components/Parts Catalog

11mm Size Metal Shaft Type EC11 Series

Detail

Part number EC11E152U402

Structure Push lock
Actuator configuration 20-tooth serration
Actuator length 26.4mm
Number of detent 30
Number of pulse 15
Push-on switch With
Travel of push-on switch 8mm
Operating life 15,000 cycles
Minimum order unit (pcs.) 1,600

Operating temperature range -40℃ to +85℃
Maximum operating current (Resistive load) 10mA
Electrical performance Ratings 10mA 5V DC
Output signal Output of A and B signals, proportionate to phase difference
Insulation resistance 100MΩ min. 250V DC
Voltage proof 300V AC for 1 minute
Mechanical performance Detent torque 10±7mN·m
Push-pull strength 100N
Resistance to soldering heat Manual soldering 350℃ max. 3s max.
Dip soldering 260±5℃, 5±1s
Environmental performance Cold -40±3℃ for 240h
Dry heat 85±3℃ for 240h
Damp heat 60±2℃, 90 to 95%RH for 240h
Push-on switch specifications Contact arrangement Single pole single throw (Push-on)
Travel 8.0±0.8mm
Operating force 8N max.
Rating 0.5A 12V DC
Contact resistance (Initial performance/After lifetime) 100mΩ max./200mΩ max.
Operating life 10,000 times min.

Certificate of Compliance to RoHS regulations  

Photo

Incremental Type Encoder

Dimensions

Incremental Type Encoder

Mounting Hole Dimensions

Incremental Type Encoder

 
Viewed from mounting side.

Output Wave

Incremental Type Encoder

Sliding Noise

Incremental Type Encoder

 
At R=5kΩ Chattering: 3ms max. Bounce: 2ms max.

Packing Specifications

Tray
Number of packages (pcs.) 1 case / Japan 800
1 case / export packing 1,600
Export package measurements (mm) 374×529×213

Product Varieties

Notes are common to this series/models.
  • This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  • Please place purchase orders per minimum order unit (integer).
  • Products other than those listed in the above chart are also available. Please contact us for details.
  • This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsukamachi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2012 ALPS ELECTRIC CO., LTD.