Number of operating shafts Single-shaft
Shaft material Resin
Lever return mechanism With
Potentiometer part Maximum operating voltage 50V AC, 5V DC
Operating angle Each direction 23° max.
Resistance taper B (0B)
Total resistance 10kΩ
Operating life 2,000,000cycles
Center push part Center push With
Ratings (max.) 50mA 12V DC
Travel 0.4(+0.5, -0.3)mm
Operating life 500,000cycles
Operating temperature range -10℃ to +70℃
Electrical performance Directional resolution Continuous
Insulation resistance 100MΩ min. 250V DC
Voltage proof 250V AC for 1 minute
Rated power 0.0125W
Slider noise 300mV p-p max. by JIS method
Mechanical performance Directional operating force 14±10mN・m
Push operating force 7.4±3N
Lever return precision ±5°
Actuator strength Push/pull directions 98N min. (Push), 50N min. (Pull)
Durability Operating life Directions 2,000,000 cycles
Center push 500,000 cycles
Environmental performance Cold -30℃ 96h
Dry heat 80℃ 96h
Damp heat 60℃, 90 to 95%RH 96h
Minimum order unit (pcs.) Japan 1,420
Export 1,420
 

Dimensions

Potentiometer Type Multi Control Device

Mounting Hole Dimensions

Potentiometer Type Multi Control Device
 
Viewed from mounting side.

Lever Dimensions

Potentiometer Type Multi Control Device

Packing Specifications

Tray
Number of packages (pcs.) 1 case / Japan 1,420
1 case / export packing 1,420
Export package measurements (mm) 544×364×178

Soldering Conditions

Reference for Dip Soldering
PreheatingSoldering surface temperature90 to 100℃
Heating time60s max.
Dip solderingSoldering temperature260℃
Soldering time5s
No. of solders1 time

Reference for Hand Soldering
Tip temperature350℃max.
Soldering time3s max.
No. of solders1 time


Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).