Number of operating shafts Single-shaft
Shaft material Metal
Contact resistance 8-direction & Center push 500mΩ max.
Operating angle (8-direction) Each direction 12±3°
Travel (Center push) 0.2±0.1mm
Operating temperature range -30℃ to +70℃
Ratings (max.) (Resistive load) 10mA 5V DC
Electrical performance Directional resolution 8-direction
Insulation resistance 100MΩ min. 250V DC
Voltage proof 300V AC for 1 minute or 360V AC for 2s
Mechanical performance Directional operating force 10±7mN·m
Push operating force 4.5±1N
Actuator strength Push/pull directions 100N (Push), 50N (Pull)
Operating direction 100N
Durability Operating life Directions Total with 8-direction 100,000 cycles
Center push 100,000 cycles
Environmental performance Cold -40±2℃ for 500h
Dry heat 85±2℃ for 500h
Damp heat 60±2℃, 90 to 95%RH for 500h
Minimum order unit (pcs.) Japan 800
Export 1,600
 

Dimensions

Switch Type Multi Control Device

Mounting Hole Dimensions

Switch Type Multi Control Device

Output Relation Chart between Lever Position and ON Position

Switch Type Multi Control Device

Circuit Diagram

Switch Type Multi Control Device

Packing Specifications

Tray
Number of packages (pcs.) 1 case / Japan 800
1 case / export packing 1,600
Export package measurements (mm) 532×379×167

Soldering Condition

Reference for Dip Soldering
PreheatingSoldering surface temperature120℃ max.
Heating time70s max.
Dip solderingSoldering temperature260℃ max.
Soldering time6s max.
No. of solders2 time max.

Reference for Hand Soldering
Tip temperature350±5℃
Soldering time3s max.
No. of solders1 time


Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).
  3. This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.