Number of resistor elements		Dual-unit
Mounting direction		Horizontal type
Fixing method of bushing		Screw
Shaft types		Flat
Length of the shaft		25mm
Center detent		Without
Total resistance		10kΩ
Resistance taper		3B

Operating temperature range		-10℃ to +70℃
Electrical Performance	Total resistance tolerance	±20%
	Rated power	0.05W
	Maximum operating voltage	50V AC, 10V DC
	Maximum attenuation	80dB min.
	Gang error	-40dB to 0dB 3dB max.
	Insulation resistance	100MΩ min. 250V DC
	Voltage proof	300V AC for 1 minute
Mechanical Performance	Total rotational angle	300°±5°
	Rotational torque	2 to 25mN·m
	Stopper strength	0.5N·m
	Push-pull strength	80N max.
	Vibration	10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively
Durability	Operating life	15,000 cycles

Minimum order unit (pcs.)	Japan	1,000
	Export	2,000

3D CAD (STEP)
Certificate of Compliance to RoHS regulations

Dimensions

Mounting Hole Dimensions

Viewed from mounting side.

Dimensions of Bushing and Fixing Lug

These parts are attached to the following products.

Attached Parts

Packing Specifications

Tray

Number of packages (pcs.)	1 case / Japan	1,000
	1 case / export packing	2,000
Export package measurements (mm)		479×369×181

Soldering Conditions

Reference for Dip Soldering Preheating Soldering surface temperature 100℃ max. Heating time 2 min. max. Dip soldering Soldering temperature 260±5℃ max. Soldering time 5±1s No. of solders 2 time max.

Reference for Hand Soldering Tip temperature 350℃ max. Soldering time 3s max. No. of solders 1 time

Notes are common to this series/models.

1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
2. Please place purchase orders per minimum order unit (integer).
3. Products other than those listed in above products are also available. Please contact us for details.
4. Please contact us for automotive use products.