Number of resistor elements Single-unit (20V DC)
Mounting direction Vertical type
Bushing With
Shaft types Flat
Length of the shaft LM1 32.5mm
Center detent Without
Total resistance 10kΩ
Resistance taper 1B
Operating temperature range -10℃ to +70℃
Electrical Performance Total resistance tolerance ±20%
Rated power 0.05W
Maximum operating voltage 50V AC, 20V DC
Insulation resistance 100MΩ min. 500V DC
Voltage proof 500V AC for 1 minute
Mechanical Performance Total rotational angle 300°±5°
Rotational torque 3 to 20mN·m
Stopper strength 0.6N·m
Push-pull strength 80N max.
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively
Durability Operating life 15,000 cycles
Minimum order unit (pcs.) Japan 800
Export 1,600
 

Dimensions

Rotary Potentiometer

Mounting Hole Dimensions

Rotary Potentiometer
 
Viewed from mounting side.

Terminal Layout / Circuit Diagram

Rotary Potentiometer

Packing Specifications

Tray
Number of packages (pcs.) 1 case / Japan 800
1 case / export packing 1,600
Export package measurements (mm) 543×377×250

Soldering Conditions

Reference for Hand Soldering
Tip temperature350℃ max.
Soldering time3s max.
No. of solders1 time


Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).
  3. Products other than those listed in above products are also available. Please contact us for details.
  4. Nut and washer are not attached. Please specify if required.