Poles 1
Positions 1
Terminal type For PC board (Reflow)
Operating force 0.4N max.
Frame Without terminal
Location lug With
Operating temperature range -40℃ to +85℃
Rating (max.)/(min.) (Resistive load) 1mA 5V DC/50μA 3V DC
Electrical performance Contact resistance (Initial/After operating life) 2Ω max./5Ω max.
Insulation resistance 100MΩ min. 100V DC
Voltage proof 100V AC for 1 minute
Mechanical performance Terminal strength 1N for 1 minute
Actuator strength 5N
Durability Operating life without load 50,000 cycles 5Ω max.
Operating life with load Rating (max.)(Resistive load) 50,000 cycles 5Ω max.
Environmental performance Cold -40℃ 96h
Dry heat 85℃ 96h
Damp heat 40℃, 90 to 95%RH 96h
Minimum order unit (pcs.) Japan 3,000
Export 12,000
 

Dimensions

Detector Switch

Backside

Detector Switch

Land Dimensions

Detector Switch
 
Viewed from direction A in the dimensions.

Terminal Layout

Detector Switch

Circuit Diagram

Detector Switch

Packing Specifications

Taping

Number of packages (pcs.) 1 reel 3,000
1 case / Japan 6,000
1 case / export packing 12,000
Tape width (mm) 16
Export package measurements (mm) 417×409×139

Soldering Conditions

Example of Reflow Soldering Condition
1. Heating method
Double heating method with infrared heater.
2. Temperature measurement
Thermocouple 0.1 to 0.2VCA(K)or CC(T)at soldering portion (copper foil surface). A heat resisting tape should be used for fixed measurement.
3. Temperature profile
A(℃)
3s max.
B(℃)C(s)D(℃)E(℃)F(s)
26023040180150120

(1) The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, surface depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures.
(2) Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended.

Reference for Hand Soldering
Soldering temperature350±5℃
Soldering time3s max.


Notes are common to this series/models.

  1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply.
  2. Please place purchase orders per minimum order unit (integer).
  3. This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.